2 rack unit amplifier, with DSP processes, support 70V/100V power supply, Touch Screen LCD and Dante(optional)

Logga in för att se pris
Artikelnr: MDA3-1000M Kategorier: ,


Power & Amplifier section

Number of Channels 3 Powered output: L/R/S
Max Output Power @ 8 ohms 2 x 150W@4ohm + 1 x 280W (Bridge) @8 ohm
Output Circuitry Class D Amplifier Module
Power Supply Independent MARANI®  SMPS
THD + N L/R: 1%; Sub:0.26%
S/N Ratio L/R: 100dB; Sub: 98dB
Consumption/Current draw and Thermal disspation @230V Sleep Mode: 4.8W/0.078A.
Idle: 23.8W/0.175A
Standby Mode:4.8W/0.078A
Protections Over-Current, Over/Under Voltage, Output DC and Over-Temperature
Analog Input 2 x RCA A/B Unbalanced
Maximum Input/Output Level +12dB

DSP & Processing

DSP Engine 1 x MARANI® DSP
DSP Resolution 24 bit (data) x 24 bit (coeff.), 54 bit accumulation registers
96 bit precision on intermediate processing data
Input Type Selection Analog Inputs
Noise Gate Threshold from -90dBV up to -60dBV, 5dBV Steps
Attack time from 1ms up to 1000ms;
Release time from 10ms up to 1000ms
Input 12-band PEQ
Output 5-band PEQ
Peaker, Q from 0.4 up to 128, Gain +/-12dBu, Center Freq from 20 to 20kHz
Variable Q Hi/Lo Shelving, Q from 0.1 up to 5.1, Gain +/-13dBV, Center Freq from 20 to 20kHz
Variable Q Hi/Lo Pass, Q from 0.1 up to 5.1, Cutting Freq from 20 to 20kHz
Notch, Q from 4 up to 104, Center Freq from 20 to 20kHz
Input RMS Compressor Threshold from -18dBV up to 12dBV; Make Up from 0 to +12dB
Knee 0~100%; Ratio from 2:1 to 32:1;
Release time from 100ms up to 3s (100ms resolution); Attack time from 5ms up to 200ms
Output HPF/LPF section Butterworth 6/12/18/24dB per octave,
Bessel, Linkwitz-Riley 12/24dB per octave,
Filter frequency resolution 1Hz
Output Peak Limiter Threshold: -18dBV ~ +12dBV, Attack time: 1ms ~ 900ms, Release time: 100ms ~ 5sec
Delay Each input channel’s selectable delay is up to 80.998ms, each output channel’s up to 50.998ms


Front Panel 1 x rotary encoder, to load or select presets
1 x Type B USB
1 x Standby button
1 x 2*16 LCD screen
1 x Power Switch
3 x Green-Red LED, indicating distortion and signal for each channel: red indicates distortion and clip , while green signal
Rear Panel 4 x RCA Connectors (Analog Input & Output)
6 x Binding Post (Amplifier Output)
1 x 110V/230V Voltage Switch
1 x Locking PowerCON® 20A: AC Power Cord (Blue)
Dimensions 482 x 247 x 88 mm
Weight, Net / Shipping 5.20 kg/ 6.00 kg

Ytterligare information

Vikt 11 kg
Dimensioner 50 × 50 × 20 cm